Loading ...
Loading ...
Loading ...
30
details, see "2.5.1.9 Setting Time Schedule".
●
When setting
Work Mode
to
Adaptive Brightness
, you need to set the default
value for brightness.
Step 4 Set the
Light Brightness
of the light.
Step 5 Click
Save
.
2.5.1.9 Setting Time Schedule
This section introduces the method of setting time schedule, which can be used when setting the
work mode of external light and other situations.
Procedure
Step 1 Click
Setting
of a day to start setting the time schedule.
Figure 2-37 Time schedule
Step 2 Double-click each green line to clear the schedule for each day based on the actual
situation, and then you can set the schedule as needed.
1. Draw one or more periods on the timeline.
2. The drawn periods are synced to the table below, which shows all periods on one day.
3. You can manually change the time for each period.
Step 3 Click
OK
.
2.5.1.10 Configuring LED Screen
Connect the LED display with the camera through RS-485, and then you can configure the status,
display type, display color, action, speed, and more parameters of the LED.
Procedure
Step 1 Select
Setting
>
ANPR
>
LED Screen
.
Loading ...
Loading ...
Loading ...