Loading ...
Loading ...
Loading ...
ge.com
Possible Causes What ToDo
Ovenwill not self-clean
The oven temperature is
too high to set a self-clean
operation.
Oven controls improperly set.
• Allow the oven to cool and reset the controls.
• See tile Using the self-cleaning oven secdon.
"Crackling" or
"popping" sound
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
• This is normal.
Excessivesmoking
duringa clean cycle
Excessive soil.
• Press tile CLEAR/OFFpad. Open tile windows to rid
the room of smoke. Wait until the LOCKEDlight goes
off. Wipe up the excess soil and reset the clean cycle.
Oven door will not Oven too hot.
open after a
clean cycle
• Allow tile oven to cool below locking temperature.
Oven notclean after Oven controls not properly set. • See die Using the self-cleaning oven secdon.
a clean cycle Oven was heavily soiled. • Clean up heax T spillovers before starting tile clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
"LOCKED" flashes The self-clean cycle has been • (;lose the oven dooL
in the display selected but the door is not
closed.
"LOCKED" light is on The oven door is locked • Press tile CLEAR/OFFpad. Allow tile oven to cool.
when you want to cook because the temperature
inside the oven has not
dropped below the
locking temperature.
"F---andanumber You have a function • Press the CLEAR/OFFpad (OFFpad on Canadian
orletter"flash error code. models). Put tile oven back into operation.
in the display If the function code repeats. • Disconnect all powex to tile range for at least
30 seconds and then reconnect poweL If the
flmcdon error code repeats, call for service.
29
Loading ...
Loading ...
Loading ...