Loading ...
Loading ...
Loading ...
Cleaningthe glass coolaop, gecom
LoCK/UNLOCK HOLD 3 SECONDS
Control Lockout
Begin by locking the cooktop; see the
ControlLockoutsection.
Cleanyourcooktopafter
each spill. Use CERAMA
BRYTE*Ceramic Cooktop
Cleaner.*
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE ® Ceramic
Cooktop Cleaner* on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your ,glasscooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE®Cermnic Cooktop
Cleaner*. This helps protect the
top and makes cleanup easieL
[_ Daily use of CERAMA BRYTE®
Ceramic Cooktop Cleaner* will
help keep the cooktop looking new.
%
Shake the cleaning cxealn well.
Apply a few drops of CERAMA
BRYTE®Ceramic Cooktop
Cleaner* directly m the cooktop.
[]
Use a paper towel or CERAMA
BRYFE®Cleaning Pad for Ceramic
Cookmps* m clean the entire
cookmp surface.
[_] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthatyou DONOT
heat the cooktopuntil it hasbeencleaned
thoroughly.
®
Use a CERAMA BRYTE' Cleaning
Pad for Ceramic Co&tops*.
Burned-On Residue
WARNING:DAMAGEto yourglasssurface
mayoccurif youusescrubpadsother thanthe
padincludedwith yourcooktop.
Allow tim cooktop to cool.
Spread a few drops of CERAMA
BRYI'E ® Ceramic Cooktop
Cleaner* on the entire burned
xesidue area.
%
Using a CERAMA BRYFE ®
Cleaning Pad for Ceramic
Cooktops*, rub tim residue area,
applying pressure as needed.
%
If any residue remains, repeat the
steps listed above as needed.
Fox additional protection, after all
residue has been removed, polish
tim entire surface with CERAMA
BRYTE® Ceramic Cookmp
Cleaner* and a paper towel.
The CERAMABRYTE® Ceramic
Cooktop Scraper* and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface
and scrape the soil. It will be
necessm T to apply pressure to
the razor scraper in order to
remove the residue.
[_ AtYer scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE®Ceramic
Cooktop Cleaner* on die entire
burned residue area. Use a
CERAMA BRYTE®Cleaning Pad*
to remove any remaining residue.
Fox additional protection,
after all residue has been
removed, polish the entire
surface with CERAMA BRYTE®
Ceramic Cooktop Cleaner*
and a paper towel.
25
Loading ...
Loading ...
Loading ...