Loading ...
Loading ...
Loading ...
www.kolpak.com 800-225-9916 4
Receiving Inspection
Check the shipment carefully and compare to the bill of lading. Account for all items
listed and inspect each container for damage. Carefully inspect for any concealed
damage. Report any shortages or damages to the carrier, note on the bill of lading, and
file a freight claim.
Damaged material cannot be returned to the manufacturer without prior approval. A
Return Material Authorization (RMA) must be obtained. Contact a sales representative
at 800-826-7036.
Panel Count and Hardware
Using the packing list and skid documentation, count the wall panels, corners, ceilings,
doors, and floors where applicable. Locate and verify the accessory and hardware
package(s).
WARNING
Do not attempt to lift the panels or accessories by yourself. Always have adequate
lifting equipment or manpower available to accomplish the task safely.
Do not unwrap the skids and leave the panels in a position that they could fall over or
blow over and cause an injury. Be sure that panels are adequately restrained at all
times.
CAUTION
Acids and oils on hands and fingers could discolor wall panel finish. Make sure to wear
appropriate gloves that are free from residue while handling wall and ceiling panels.
CAUTION
Make sure to store the panels as noted below if necessary to ensure that they are not
damaged prior to being installed.
Panel Storage
If the walk-in panels must be stored on a job site before installation, store them inside if
possible.
The PVC protective panel covering should only be removed after final assembly of the
walk-in. Gloves should be worn to prevent acids and oils on hands/fingers from creating
smudges on panel surface.
The panels may be stored on skids as received, provided the skids are on level surface
and kept free of moisture.
Loading ...
Loading ...
Loading ...