Loading ...
Loading ...
Loading ...
www.kolpak.com 800-225-9916 27
Tapered Roof System
The tapered roof system consists of tapered foam sheets, rolled polyethylene roof cap
membrane, flashing, roof cap trim, and fasteners. Installation is identical to standard
membrane roofs with the exception of adding the sloped foam sheets. In applications
with very large roofs, multiple layers of sloped foam may be required. For install
locations with a high wind speed rating per building code, extra fasteners will be
supplied so that the installer can use 6 fasteners and plates in each of the 4”x4” foam
sheet sections. The installer should use the fastener pattern shown below.
WARNING
Building codes require a minimum of ¼ inch per foot slope on outside roof systems. If a
tapered roof system is not purchased with an exterior walk-in, it is the purchaser’s
responsibility to ensure this requirement is met.
Loading ...
Loading ...
Loading ...