User Manual - Page 181

For AVIC-8100NEX.

Loading ...
Loading ...
Loading ...
p If the shift lever is aligned to the REVERSE
(R) position immediately after the system of
this product is started up, only the camera
image will be displayed and the parking as-
sist guidelines will not be displayed. The
parking assist guidelines will be displayed
on the camera image after a little while. Be
sure to check the conditions around the ve-
hicle even before the guidelines and the
message are displayed.
Camera for Camera View mode
Camera View can be displayed at all times
(e.g. when monitoring an attached trailer,
etc.). Please note that with this setting, the
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
CAUTION
Check to make sure settings for rear view camera
displays a mirror reversed image.
p Immediately verify whether the display
changes to a rear view camera image when
the shift lever is aligned to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
Reverse Gear Setting.
Setting rear view camera
activation
To view images of the rear view camera on the
screen of this product, Back Camera Input
needs to be set to On.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The System screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Back Camera Input] repeatedly
until the desired setting appears.
! Off (default):
Turns the back camera input setting off.
! On:
Turns the back camera input setting on.
Setting the polarity of the rear
view camera
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The System screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Reverse Gear Setting] repeat-
edly until the desired setting appears.
! Battery (default):
When the polarity of the connected lead is
positive while the shift lever is in the RE-
VERSE (R) position.
En
181
Chapter
32
System settings
System settings
Loading ...
Loading ...
Loading ...