Loading ...
Loading ...
Loading ...
Connection through a Router
You can set up an Ethernet connection between the camera and a computer through a
router with following steps:
1. Set the Network-ETH. Mode to “Router” in Connect-Network setting (2.10
Connect – Network-ETH. mode)
2. Connect the camera to a router with an Ethernet cable, then connect the router to
the computer with Ethernet cable or Wi-Fi. (Note: Camera and PC should connect
to the LAN port of router, not WAN port)
3. Check the Connect – Network setting, and there will show the IP address of the
camera on ETH.IP item (e.g. 192.168.1.101) if the connection is OK.
Loading ...
Loading ...
Loading ...