Loading ...
Loading ...
Loading ...
2.9.
Connect
Network: there are sub-items as below:
Wi-Fi: Off / On. When the Wi-Fi is activated, here will show the Wi-Fi ID, which
is ZCAM-E2-XX-XXXX (last four digits which match to the camera ID), and the
default password is: 12345678, which can only be changed with iOS app (6.
Using Z Camera App)
Wi-Fi IP: Here will show IP address of the Wi-Fi when it’s is activated.
ETH. Mode (Ethernet Mode): Direct / Router / Static
-
Router: Camera is connected to the computer through a router, IP address
will be assigned by the router.
- Direct: Camera is connected to the computer directly through Ethernet
cable, camera will generate the IP address. The default is: 10.98.32.1
-
Static: to set the IP address with configuration file. (Please contact Z CAM’s
technical support if you want to set this)
ETH. IP: IP address of the Ethernet when it’s connected.
USB: Host / Mass Storage / Network / Serial
Host: The camera will act as a host device which can transfer data to external
storage (SSD e.g.) or communicate with external device like smart phone or
tablet etc. with Z Camera app (6. Using Z Camera App).
Mass Storage: The camera will be recognized as a storage when it is
connected to a computer (PC / Mac), and the file on the CFast card inside the
camera can be accessed.
Network: The camera will act as a RNDIS device.
The camera will be recognized as a RNDIS device when it is connected to a
Loading ...
Loading ...
Loading ...