Loading ...
Loading ...
Loading ...
2.10.
System
Clear Settings：Clear all the Settings in the camera and set them to default values.
Format Card
：
Format the CFast card or the external SSD connected through USB
Type C port (if there is no CFast card in the camera). Please note that formatting
will erase ALL DATA in the storage!
Assist Tools: There is three sub-items in this setting: Display / Scope / Peak /
Exposure / Frame Line / Center Mark / Grid Line / Safe Area
Display: On / Off. To enable or disable the assist tool on the display. Please
note that when the assist tool is enabled, the effect will be output through HDMI
together with the video stream. So you would need to turn it off if you are using
external recorder though HDMI connection.
Scope: Tool / Opacity / Measure
-Tool: Disable / Waveform / Parade / Vectorscope / Histogram, HDMI output
monitor view
-Opacity: 10~100, adjust the tool’s transparency on the display
-Measure: Without LUT / With LUT, if it's set to ” With LUT”, then the scope tool
will measure on the video with LUT, otherwise it will measure the video without
LUT.
Peak: Enable / Color / Monochrome / Threshold
- Enable: Off / On, to enable / disable the Peak tool and set the color of
peaking focus.
- Color: Red, Green, Blue, Orange and White, choose the color of peaking
focus display.
Loading ...
Loading ...
Loading ...