Loading ...
Loading ...
Loading ...
computer (PC / Mac) or external device. Computer or external device can
access or control the camera using the HTTP API. (for HTTP API information,
contact Z CAM technical support)
Serial: The camera will be controlled by UART command from a computer
through USB port.
HDMI: Display Info. / OSD Layout / Resolution / Use EDID
Display Info: On / Off. Turn on / off camera status on HDMI monitor.
OSD Layout: Type 1 / Type 2
Type 1: Assist tool as waveform etc. display on the video directly.
Type 2: Add the black frame area to display assist tool.
Resolution: Auto / Manual (options supported by the HDMI display).
Auto: The camera will select the most suitable format (resolution & frame rate)
from the HDMI monitor.
Manual: Here will list the formats supported by the HDMI monitor for the user to
select manually.
Use EDID: Disable / Enable. This setting determines whether the camera
automatically reads the EDID information of the HDMI connected monitor.
UART Role
：
Controller / Pelco D / Multiplexer / Linear TC.
UART Role2：Controller / Pelco D / Multiplexer / Linear TC, can set separately:
- Controller: The camera will be controlled by UART command from a computer
through COM port.
-
Pelco D：The camera will control the external device like a gimbal through COM
port with Pelco D protocol.
- Multiplexer：Need 3
rd
-party device to support.
- Linear TC: to be supported with extra accessories later.
Loading ...
Loading ...
Loading ...