Loading ...
Loading ...
Loading ...
R
the ATA (anti-theft alarm system) is not avail‐
able.
R
the function for detecting damage on a
parked vehicle is not available.
If the following conditions are fulfilled, standby
mode can be activated or deactivated using the
multimedia system:
R
the engine is switched off.
R
the ignition is switched on.
Exceeding the vehicle's displayed non-opera‐
tional time may cause inconvenience, i.e. it can‐
not be guaranteed that the starter battery will
reliably start the engine.
The starter battery must be charged first in the
following situations:
R
The vehicle's non-operational time must be
extended.
R
The
Battery Charge Insufficient for Standby
Mode
message appears in the media display.
%
Standby mode is automatically deactivated
when the ignition is switched on.
Activating/deactivating standby mode
Multimedia system:
4
Vehicle
5
î Vehicle Settings
5
Standby Mode
%
This function is not available for all models.
#
Activate O or deactivate ª the function.
When you activate the function, a prompt
appears.
#
Select Yes.
Standby mode is activated.
Driving and driving safety systems
Driving systems and your responsibility
Your vehicle is equipped with driving systems
which assist you in driving, parking and maneu‐
vering the vehicle. The driving systems are aids
and do not relieve you of your responsibility per‐
taining to road traffic law. Pay attention to the
traffic conditions at all times and intervene
when necessary. Be aware of the limitations
regarding the safe use of these systems.
Information on radar and ultrasonic sensors
Some driving and driving safety systems use
radar or ultrasonic sensors to monitor the area
in front of, behind or next to the vehicle (depend‐
ing on the vehicle's equipment).
Depending on the vehicle's equipment, the radar
sensors are integrated behind the bumpers
and/or behind the Mercedes star. The ultrasonic
sensors are located in the front and rear bump‐
ers. Keep these parts free of dirt, ice and slush
(/ page 362). The sensors must not be cov‐
ered, for example by bicycle racks, overhanging
loads, stickers, foil or foils to protect against
stone chipping. Additional license plate brackets
can likewise impair the function of the ultrasonic
sensors. In the event of damage to the bumpers
or radiator grill, or following a collision impacting
the bumpers or radiator grill, have the function
of the sensors checked at a qualified specialist
workshop. If the sensors are damaged, some
driving systems and driving safety systems may
no longer function properly.
Driving and parking
161
Loading ...
Loading ...
Loading ...