Loading ...
Loading ...
Loading ...
22
inspection. The Imager head and cable are waterproof to a
depth of 1m (39.4’’). Do not use in greater depths as pressure
may cause the image header and the cable to become
damaged risking electrical shock to user. The display unit is
not waterproof and should not be exposed to wet conditions.
Especially if using the tool in drains, ensure no chemicals
have been used as caustic chemicals may damage the tool.
The tool should not be used in an area that is excessively hot
(above 122 degrees Fahrenheit) or cold (below 14 degrees
Fahrenheit).
Do not use the tool around or in system with moving parts.
3) Ensure the correct accessory is used for the appropriate
application.
IMPORTANT
CAUTION:
Make sure the tool has been powered off before cleaning tool.
Tool maintenance should only be performed by qualified repair
personnel. Maintenance performed by unqualified repair
personnel could cause injury.
Use only replacement parts authorized to be used with or on
product. Only perform the maintenance instructions described.
Unauthorized maintenance may create a risk of electric shock or
injury.
Follow instructions to change accessories.
Clean the tool with alcohol only. Swab the connections carefully.
Do not use acetone. Do not use excessive pressure when cleaning
the LCD screen. After each use, use a dry cloth to gently wipe the
display unit.
Loading ...
Loading ...
Loading ...