Loading ...
Loading ...
Loading ...
th the use of an optional DoIby
urround Prologic Amplifier you
can receive the added sound
dimension found only in Dolby
Surround programs. Dolby Surround
combines wide left-to-right stereo
separation _ith solid center channel
imaging, complemented by a front-to-
back soundfietd effect. The result for
you the listener is to create a movie
theater or ccncert hall "you are there"
sound sensation.
_,_ Connect the FIXED Audio
Output jacks on the TV to the AUX
INPUT jacks on a Dolby Prologic
Audio Amplifier system.
_ Connect the CENTER
CHANNEL Input jack on the TV to
the CENTER PRE-AMP jack on the
Dolby Prologic Amplifier.
_ Connect the rear set of Surround
Sound speakers to the (+,-)
connections on the Dolby Surround
Amplifier.
Place the Audio System's Front and
Rear Surround speakers as shown in
the picture on this page.
_ Turn the "IV ON. Set TV Volume to
normal listening level. Place the TV's
TV SPEAKERS (Sound Menu 2 of 3)
control to "CENTER CHANNEL
INPUT".
Turn the I)olby Prologic Amplifier
ON. Place its SURROUND MODE
control to the Dolby Prologic mode.
_ The full effect of DOLBY
SURROUND programs (either
broadcast, VCR, or VDP) can now be
heard through the TV and Amplifier
system speakers.
Remember. R(ight)/L(efl)
channel stereo sound and rear
Surround sound will be heard from the
external (or Dolby Pro!ogle Amplifier
system) speakers. The TV's front
cabinet speakers are used for true
Ccnter Channel sound necessary to
complete the Dolby Prologic Surround
arrangement.
You will need the following to set-up and use the designed
SURROUND SOUND system shown below:
• One set of rear Surround Sound speakers
One Dolby Prologic Audio Amplifier (with Center Pre-Amp
Output and twin speakers)
One DOLBY SURROUND encoded souice (either playback -
VCR, VDP, etc.- or broadcast).
SURROUND
;PEAKERS
Dolby Prologic
Audio
CENTER
PRE-AMP
AUDIO
Left Front
Right Front
Speaker
_NEL li_
jack's volume, bass, and treble
bevels can be adjusted with the
TV's VOLAV buttons or using
on-screen Menu controls.
_Surround Speaker7
R,L REAR
SURROUND
SPEAKERS
R SPEAKER OUTPUT
SPEAKER OUTPUT
_ _ R, LAUOIOINPUT
CENTER R, L FIXEO
CPANI_ EL UDIO OUTPUT
Amplifier INPUT
LEFT SPEAKER
CENTER CPANh EL
Use Ihe noise sequencer (or suund test signal) on
the I)olby Prologic Amplifier. Adjust the Center
Channel volume level (using Ihe Dolby Prologic
Amp's Center Channel Volunie control) to equal
the left!right and surround speaker volume levels.
If C.'rltcr Channel volume is still too low after
using the Dolby Prologic Amplifier. use the TV's
Volume control buttons to set desired Center
Channel level.
l'vla],e sure the TV's BALANCE control is sel to
the middle position or the Center channel sound
ima..'e will nol be cenlered.
Use the Dolby Prologic A'nplifier's Volume
buttgns to adjust the surro.md syslem sound level.
VIEWING AREA
REAR SURROUND SOJNDSPEAKERS
RIGHT SPEAKER
25
Loading ...
Loading ...
Loading ...