Loading ...
Loading ...
Loading ...
Dishes en
21
Lamb Core temperature
in °C
Leg of lamb, medium rare 60 - 65
Leg of lamb, well done 70 - 80
Saddle of lamb, medium rare 55 - 60
Fish Core temperature
in °C
Fish, whole 65 - 70
Fish fillet 60 - 65
Other Core temperature
in °C
Meat loaf, all kinds of meat 80 - 90
Heating food, reheating 65 - 75
14 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
14.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300°C. Glass or
glass ceramic cookware is best. The joint should cover
approx.2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
14.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note:The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press
"Info". Some mes-
sages are displayed automatically.
Programmes
The optimum type of heating, temperature and cooking
time are preset for programmes.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
Unless otherwise indicated, set the total weight for your
dish.
Recommended settings
For the recommended settings, the optimum type of
heating is preset as a fixed value.
You can adjust the preset temperature and the cooking
time.
Baking sensor
Some dishes are suitable for cooking with the baking
sensor
. You do not have to implement any further
settings.
The baking sensor monitors the baking process in the
cooking compartment. The appliance regulates the set-
tings automatically and ends the operation once the
dish is ready.
Notes
¡ Do not use the baking sensor if the dish is already
pre-baked. The baking result would no longer be
satisfactory.
¡ Do not open the appliance door approx.5minutes
after starting the operation with the baking sensor.
The baking sensor mode stops.
If you have to open the appliance door, restart the
operation afterwards without the baking sensor or
cancel the operation and set it manually. Monitor the
cooking process until the food is ready.
¡ To achieve an optimal baking result, use dark-col-
oured metal baking tins.
ATTENTION!
Using silicone moulds or any film, covers or accessor-
ies that contain silicone could damage the baking
sensor. Damage may occur even if the baking sensor
is not active.
▶ Do not use silicone moulds or any film, covers or
accessories that contain silicone.
▶ Never place objects made of silicone in the cooking
compartment.
Remaining time forecast for the operation
If your appliance is connected to HomeConnect, the
appliance can forecast the expected remaining time for
the cooking process.
The initial remaining time appears on the display after
approx.1minute. The remaining time is continually re-
calculated and updated.
Note:The remaining time forecast is not available for
all types of heating.
Loading ...
Loading ...
Loading ...