Epson C11CH37201 SureColor P900 17" Photo Printer

User Manual - Page 122

For C11CH37201.

PDF File Manual, 158 pages, Read Online | Download pdf file

C11CH37201 photo
Loading ...
Loading ...
Loading ...
122
If you connected your product to a Windows computer using Wi-Fi Direct and it automatically selected
Access Point Mode, you may have trouble accessing a low-priority Internet connection. Check the
network connection or adapter settings in the Windows Control Panel and set the Internet metric
setting to 100 for your version of the Internet Protocol.
Parent topic: Solving Network Problems
Network Software Cannot Find Product on a Network
If EpsonNet Setup cannot find your product on a network, try these solutions:
Make sure your product is turned on and connected to your network. Verify the connection using your
product control panel.
Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-
ASCII characters.
Print a network connection report and check the codes and messages on the report to help determine
the cause of the problem.
Make sure your product is not connected to a guest network.
If necessary, reinstall your product software and try running EpsonNet Setup again:
1. Reset your product's network settings to their factory defaults.
2. Windows only: Uninstall your product software.
3. Restart your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your Internet connection when you
restart your router, so note the next step before restarting it.
4. Download your product software from the Epson website using the instructions on the Start Here
sheet.
If you have replaced your router, reinstall your product software to connect to the new router.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
Loading ...
Loading ...
Loading ...