Loading ...
Loading ...
Loading ...
66
Section 7: Lights, Doors, Drawers, and Hinges
7.1 LED Lighting
1. Refrigerated Drawers: are equipped with two LED lights. The upper LED is located on
the ceiling of the cabinet, while the lower LED is located on the underside of the mullion
assembly. These lights are controlled by the opening and closing of the associated
drawer. Each light is controlled by an independent rocker switch, which is located
behind each drawer on the back wall of the cabinet.
2. Beverage Centers: Have two LED lights and are located on the right hand and left hand
front of the cabinet ceiling.
3. Wine Coolers:
Single Zone: Have two LED lights which are located on the right hand and left
hand front of the cabinet ceiling.
Dual Zone: Same as the single zone with two additional LED lights on the center
divider in like positions as the cabinet ceiling.
The LED lighting for beverage centers and wine coolers is controlled both by the light switch on
the user interface display and also by the read switch mounted on the bottom flange of the
cabinet. Pressure from the door gasket makes and breaks the read switch circuitry to control
light function with door openings and closings.
Additional lighting features can be reviewed in the controls operation section in this manual.
7.1.1: Replacing the LED Light
1. Remove both Phillips screws in lens cover, the LED assembly can now be removed. (A
refrigerated drawer mullion is used for reference in below photo).
2. Disconnect the connector plug to replace LED.
3. Reverse process to install.
Refrigerated drawer mullion
shown in photo.
Loading ...
Loading ...
Loading ...