Loading ...
Loading ...
Loading ...
262
20.4: SERVICE BULLETIN # 41014167
Slotted Condenser Shroud
Complaint:
The condenser fan motor cannot be replaced without disconnecting all the existing
wiring passing through the hole in the fan shroud.
Correction:
The new fan shroud is slotted from the bottom of the hole in the fan shroud to the
bottom edge of the shroud surface.
To replace the fan motor, simply remove the fan shroud assembly as mentioned in
Section 4, remove the protective plastic grommet inside the diameter of the hole, tip
the shroud assembly and remove the wires from the slot.
Models Impacted: Most ML and MP models (excludes ice machines).
Serial Number Range: Production prior to 20150505033H
Wire bundle
passing through the
plastic grommet
inserted into the
condenser shroud.
Original Fan Shroud
Revised
Fan
Shroud
Loading ...
Loading ...
Loading ...