Loading ...
Loading ...
Loading ...
207
NOTE: When reinstalling the toe grill care must be taken to be sure that the
communication cable is routed through the correct area in the toe grill.
The below left hand photo shows the correct routing of the communication
cable, it must pass freely with clearance on all sides.
The below right hand photo shows the incorrect routing of the communication
cable. It is very easy for the cable to end up in this position if care is not taken
when reinstalling the toe grill. This is a critical pinch spot and will create a service
call in the future with either a frayed or cut cable.
NOTE: Always ensure that the plastic cable grommet is installed
correctly.
CORRECT Wire Position- Inside Grommet.
INCORRECT WIRE POSITION.
Remove each Phillip screw on each side of the
louvered access panel to gain additional access.
Loading ...
Loading ...
Loading ...