Loading ...
Loading ...
Loading ...
22
8. Remove liquid and capillary lines from filter drier.
9. Drill a ½” hole in the left hand corner of the drain sump as close to the side wall as
possible. The hole must extend into the machine compartment.
10. Remove any sharp burrs on the roof of the machine compartment created by the
drill bit.
Cut away suction line at the above locations.
Drill a ½” hole downward into machine
compartment. See recommendations in step 9
above.
Extend new assembly through the hole. Make
sure ends are capped.
Install vibration isolator on heat exchanger
assembly behind evaporator.
Cut the suction tube extension to connect the
compressor to the suction line.
Loading ...
Loading ...
Loading ...