Loading ...
Loading ...
Loading ...
252
NOTE: See the following photos for reference.
Wiring Harness A
1. Locate and remove the Phillip’s head screw which secures the main power board
mounting bracket to the cabinet frame.
2. Remove the power connector at the bottom, left rear of the main power board (see
above photo).
3. Plug connector “1” on harness A into the POWER terminal on the main power board.
4. Attach the original connector previously removed from the POWER terminal to
connector “2” on harness A.
5. Plug the remaining connector “3” into the adjoining terminal on the power supply
from the kit.
Wiring Harness B
1. Locate connector “4” on harness B. The wire will be identified as “Power Supply”.
Plug this connector into the remaining terminal on the power supply from the kit.
2. Locate the yellow and black harness extending through the upper, left hand corner
of the machine compartment. The connector will be marked as “Mullion Heater”.
The wire will be coiled and unplugged as seen in picture above.
3. Plug the coiled connector (step 2) into the matching yellow and black wire on
harness B, connector “6”. It is also marked as “Mullion Heater”.
4. The remaining connector “5” will be plugged into the “Aux C” terminal on the main
power board.
5. At this time, the paper can be peeled off the adhesive tape on the bottom of the
power supply. With the power supply in one hand, reach between the main power
board and the condenser fan and place the power supply in a position where it will
be out of the way. Press down on the power supply to adhere into place. The wires
can be routed over the top of the main power board.
6. Place the main power board mounting bracket back into position. Confirm that the
rear slot on the mounting bracket is secured by the positioning tab on the bottom of
the machine compartment. Take care not to pinch any wires during this step.
7. The main power board mounting bracket can now be re-secured to the cabinet
frame using the Phillip’s screw.
8. If necessary the wires can be secured together with a nylon wire tie.
Loading ...
Loading ...
Loading ...