Loading ...
Loading ...
Loading ...
6
2. PREPARING YOUR MACHINE FOR FIRST USE
MAX
3. Remove the water tank
and ll with fresh clean
water, taking care not to
exceed the MAX level.
1. Wash and dry all accesso-
ries (including water tank
(A7)) with warm water
and washing-up soap
.
2. Insert the drip tray (A19)
complete with cup grille
(A16) and (A17).
4. Plug in the machine
and make sure the main
switch (A1) on the side
of the machine is pressed
and in the I position.
5. Place a container with a
minimum capacity of 3.38
oz /100 ml under the hot
water spout (A11).
6. Press
OK
(B6) to start
priming. Hot water will
be delivered from the
hot water spout.
7. Insert coee lter ((C3)
or (C4)) in the portal-
ter (C1).
8. Attach the portalter to
the machine: Align the
portalter handle with the
“INSERT” mark, then turn
the handle to the right
until it is aligned to the
“CLOSE” mark.
9. Place a container under
the portalter and steam
wand (A9) and press OK
.
Repeat 2 times to rinse the
coee circuit.
10. Push the STEAM button (B9)
and let the steam ow out
for a few seconds. Then push
the button again to stop. For
optimal steam performance
we recommend you repeat
this action 3 or 4 times. This
is to purge the steam circuit
before frothing or steaming
your milk.
1
5
9
2
6
10
3
7
4
8
Loading ...
Loading ...
Loading ...