Loading ...
Loading ...
Loading ...
20
PROBLEM CAUSE SOLUTION
At the end of descaling, the appliance
requests a further rinse
During the rinse cycle, the water tank
(A7) has not been lled to the MAX
level
Complete the rinse cycle from point (8) of sec-
tion “11. Descaling”
The grinder is running, but no ground
coee is coming out
The grinder might be obstructed or
clogged
Turn the grinder selector (A2) to position 8 and
use a vacuum to remove all beans from the
bean hopper (A3) until empty and clean. If the
problem persists, contact Customer Service.
If you want to change the type of coee • Remember to add to the bean hopper
only the amount of beans that you in-
tend to use
• Either use a vacuum cleaner or, to avoid
wasting your beans, grind all the beans
until hopper is empty.
• Place the new coee in the beans
container
• If the amount of coee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
rst use
After grinding, the coee lter is empty The coee grinder funnel is clogged
See section “9. Cleaning the grinder”.
After grinding, the ground coee in the
lter does not reach the “perfect dose”
The quantity of ground coee needs
adjusting
Adjust the quantity of coee with the dial
(B4). If the dial is already in the max. position,
select the second range of grinding adjust-
ment (see “7. Menu settings”- “Extra grinding
adjustment”).
You are using the double lter Make sure that the 2X cup light is on
Over time the burrs wear down
Address to a Customer Service Centre to
change burrs.
Loading ...
Loading ...
Loading ...