Loading ...
Loading ...
Loading ...
11
5. EXPLANATION OF LIGHTS
LIGHTS EXPLANATION OF LIGHTS OPERATION
All the lights ash briey Turning the machine on Self-diagnosis
On
The appliance is being turned on for the rst
time and the water circuit must be lled
Proceed as described in section “2. Preparing
your machine for rst use”
+
On
( and lights show the
corresponding current selection)
The machine is ready to use
Prepare the machine, select the desired
beverage and press OK to start delivery
Flashing
The machine is heating up
Wait until the machine reaches the brewing
temperature
On
Insucient water in tank (A7) or water
tank not inserted correctly
Fill the tank or extract the tank and put it back
correctly
Flashing
You are trying to deliver a beverage but
water tank (A7) is empty
Fill the tank
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the portalter (C1) and repeat the op-
erations to make the coee, bearing in mind
the instruction given in the quick start guide
relative to the grinding section
The lter (C3) or (C4) is clogged Clean as described in section “8. Cleaning and
maintenance”
The tank (A7) has been inserted incorrectly
and the valves on the bottom are not open
Press the tank down lightly to open the valves
on the bottom
Scale in the water circuit Descale as described in section “11. Descaling”
On
1-dose beverage is selected All the process (from grinding to delivery) is
setted for preparing 1 cup
On
2-doses beverages are selected All the process (from grinding to delivery) is
setted for preparing 2 cups
MIN MED MAX
On
Choose 1 of the 3 temperatures
available
See “5.1 Focus on temperature”
Flashing
General alarm Contact Customer Service
…
→
Loading ...
Loading ...
Loading ...