D-Link DGS-1210 User Manual

Loading ...

4 Configuration D-Link Smart Managed Switch User Manual

DGS-1210-28MP Port 1 ~ Port 24: Max. PoE Output 30 Watts 370 Watts

DGS-1210-52MPP Port 1 ~ Port 48: Max. PoE Output 30 Watts 740 Watts

The DGS-1210 series work with all D-Link 802.3af or 802.3at capable devices. The Switch also works in PoE

mode with all non-802.3af capable D-Link AP, IP Cam and IP phone equipment via the PoE splitter DWL-

P50.

IEEE 802.3at defined that the PSE provides power according to the following classification:

Class Usage

Output power limit by PSE

0 Default 15.4W

1 Optional 4.0W

2 Optional 7.0W

3 Optional 15.4W

4 Reserved 30W

The PoE port table will display the PoE status including, Port Enable, Power Limit, Power (W), Voltage (V),

Current (mA), Classification, Port Status. You can select From Port / To Port to control the PoE functions of

a port. The DGS-1210 series will auto disable the ports if port current is over 375mA in 802.3af mode or

625mA in pre-802.3at mode.

Note:

The PoE Status information of Power

current, Power Voltage, and Current is the power

age information of the connected PD; please

"Refresh" to renew the information.

Figure 4.130 – PoE > PoE Port Setting

From Port/To Port: Specifies the PoE function of a port or ports.

State: Select “Enabled” or “Disabled” to configure PoE function for designated port(s). Default is Enabled.

Time Range: Select the PoE time profile configured from Time-Based PoE > Time Range Settings to enable

the time-based PoE function on designated port(s). Default setting is N/A.

Loading ...

D-Link DGS-1210 Smart Managed Gigabit Switches