Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
24
Flow Control: You can enable this function to mitigate the traffic congestion. Ports configured for full-duplex
use 802.3x flow control, half-duplex ports use backpressure flow control. The default setting is Disabled.
Auto Downgrade: Enable or disable automatically downgrading advertised speed. This function only takes
effect, when Speed is configured as Auto.
System > Port Description
Port description can be given on this page.
Figure 4.21 – System > Port Description
From Port / To Port: Specify the range of ports to describe.
Description: Specify the description for the chosen ports.
Click Apply to set the description in the table.
System > DHCP Auto Configuration
This page allows you to enable the DHCP Auto Configuration feature on the Switch. When enabled, the
Switch becomes a DHCP client and gets the configuration file from a TFTP server automatically on next boot
up. To accomplish this, the DHCP server must deliver the TFTP server IP address and configuration file
name information in the DHCP reply packet. The TFTP server must be up and running and store the
necessary configuration file in its base directory when the request is received from the Switch.
Figure 4.22 – System > DHCP Auto Configuration
System > DHCP Relay > DHCP Relay Global Settings
User can enable and configure DHCP Relay Global Settings on the Switch.
Loading ...
Loading ...
Loading ...