D-Link DGS-1210 User Manual

Loading ...

3 Getting Started D-Link Smart Managed Switch User Manual

In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the

same subnet as the switch. For example, if the switch has an IP address of 10.90.90.90, the PC should have

an IP address of 10.x.y.z (where x/y is a number between 0 ~ 254 and z is a number between 1 ~ 254), and

a subnet mask of 255.0.0.0. There are two ways to launch the Web-based Management, you may either click

the Web Access button at the top of the SmartConsole Utility or open the web browser and enter 10.90.90.90

(the factory-default IP address) in the address bar. Then press <Enter>.

Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser

NOTE: The switch's factory default IP address is

10.90.90.90 with a subnet mask of 255.0.0.0 and

a default gateway of 0.0.0.0.

The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole

Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web

configuration in your web browser.

When the following logon dialog box appears, enter the password and choose the language of the Web-

based Management interface then click OK.

The switch supports 10 languages including English, Traditional Chinese, Simplified Chinese, German,

Spanish, French, Italian, Portuguese, Japanese and Russian. By default, the password is admin and the

language is English.

Figure 3.3 – Logon Dialog Box

Smart Wizard

After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Smart

Managed Switch. Please refer to the Smart Wizard Configuration section for details.

Web-based Management

By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface. Please

refer to Chapter 4

Configuration

for detailed instructions.

D-Link Network Assistant (DNA)

D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same Layer

2 network segment as your PC. You can download the DNA App from the Chrome Web Store and install it in

a Chrome web browser.

1. Go to the Chrome web store at: https://chrome.google.com/webstore

, the search for ‘D-Link Network

Assistant’ to download the App.

Loading ...

D-Link DGS-1210 Smart Managed Gigabit Switches