Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
66
Click the Delete button to remove the entry
L3 Functions > IPv4 Routing Table Finder
The IPv4 Routing Table Finder page shows the current IPv4 routing table of the Switch. To find a specific
IPv4 route, enter and IPv4 address into the Network Address field and click the Search button.
Figure 4.83 – L3 Functions > IPv4 Routing Table Finder
L3 Functions > IPv6 Static Route
The IPv6 Static Route page allows user to configure the IPv6 route settings.
Figure 4.84 – L3 Functions > IPv6 Static Route
IPv6 Address/Prefix Length: Specify that packets matching that address will be translated.
Nexthop Address: Specify the next hop IP address.
Metric (1-65535): Represents the metric value of the IP interface entered into the table. This field may read
a number between 1 and 65535.
Backup State: Each IP address can only have one primary route, while other routes should be assigned to
the backup state. When the primary route failed, switch will try the backup routes according to the order
learnt by the routing table until route success. The field represents the Backup state that the Static and
Default Route is configured for.
Click Add to create a new IPv6 Static Route.
L3 Functions > IPv6 Routing Table Finder
The IPv6 Routing Table Finder page shows the current Ipv6 routing table of the Switch. To find a specific
Ipv6 route, enter and IPv6 address into the IPv6 Network Address field and click Search.
Figure 4.85 – L3 Functions > IPv6 Routing Table Finder
IPv6 Network Address: Specify the IPv6 address.
Loading ...
Loading ...
Loading ...