Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
80
Figure 4.107 – Security > Smart Binding > Black List
By giving conditions, desired devices information can be screened out below and then click Find to search
for a list of the entry:
VID: Enter the VLAN ID number of the device.
IP Address: Enter the IP Address of the device.
MAC Address: Enter the MAC Address of the device.
Port: Enter the port number which the device connects to.
Check a box of Delete column to release an entry from the forbidden list and then click Apply to delete an
entry from the list.
Click Select All to select all entries, or click Clean to select none of the entries
AAA > RADIUS Server
The RUAIUS Server of the Switch allows you to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
Figure 4.108 – AAA > RADIUS Server
Index: Choose the desired RADIUS server to configure: 1, 2 or 3. The user can create maximum 5
RADIUS
servers.
IP Address: Select IPv4 or IPv6 and enter the IP address.
Authentication Port (1 - 65535): Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port (1 - 65535): Set the RADIUS account server(s) UDP port. The default port is 1813.
Timeout (1 – 255 sec): This field will set the time the Switch will wait for a response of authentication from
the user. The user may set a time between 1 and 255 seconds. The default setting is 5 seconds.
Retransmit (1 – 255 times): This command will configure the maximum number of times the Switch will
accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be
Loading ...
Loading ...
Loading ...