Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
9
9
3
3
Figure 4.128 - ACL > ACL Hardware Resource Status
PoE > PoE Global Settings
This page will display the PoE status including System Budget Power, Support Total Power, Remainder
Power, and The ratio of system power supply.
Figure 4.129 – PoE > PoE Global Setting
System Power Threshold: Manually configure the system power budget.
Power Shut Off Sequence: Defines the method used to deny power to a port once the threshold is reached.
The possible fields are:
Deny next port: When the power budget is exceeded, the next port attempting to power up is
denied, regardless of the port priority.
Deny low priority port: The port with the lower priority will be shut down to allow the higher priority
port to power up.
Click Apply to make the configurations take effects.
System Power Status: Displays the system power status of device.
Total PoE Power Budget: Displays the total PoE power budget of this switch.
Power Used: Displays the current used power of the switch.
Power Left: Displays the spare power of the switch.
The percentage of system power supplied: Displays the percentage of system power supplied of
the switch.
PoE > PoE Port Settings
The DGS-1210 series supports Power over Ethernet (PoE) as defined by the IEEE specification. The PoE
port specification is listed in the table below:
Model Name PoE Capable Ports Power Budget
Loading ...
Loading ...
Loading ...