Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
20
HTTP: Backup or upgrade the firmware to or from your local PC drive.
Backup/Restore Image ID Number: Select image_id1 or image_id 2
Click Backup to save the firmware to your disk.
Click Choose File to browse your inventories for a saved firmware file.
Click Upgrade after selecting the firmware file you want to restore.
TFTP: Specify the Image_id1 or Image_id2 to backup or upgrade the firmware to or from a remote TFTP
server. Specify TFTP Server IP Address with IPv4 or IPv6 address and TFTP File Name for the
configuration file you want to save to / restore from.
Backup/Restore Image ID Number: Select Image_id1 or Image_id 2
Click Backup to save the firmware to the TFTP server.
Click Upgrade after selecting the firmware file you want to restore.
CAUTION: Do not disconnect the PC or remove
the power cord from device until the upgrade
completes. The Switch may crash if the
Firmware upgrade is incomplete.
Tool Bar > Smart Wizard
By clicking the Smart Wizard button, you can return to the Smart Wizard if you wish to make any changes
there.
Tool Bar > Online Help
The Online Help provides two ways of online support: D-Link Support Site will lead you to the D-Link
website where you can find online resources such as updated firmware images; User Guide can offer an
immediate reference for the feature definition or configuration guide.
Figure 4.15 – Online Help
Function Tree
All configuration options on the switch are accessed through the Setup menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.
Loading ...
Loading ...
Loading ...