Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
14
4 Configuration
The features and functions of the D-Link Smart Managed Switch can be configured for optimum use through
the Web-based Management Utility.
Smart Wizard Configuration
After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Smart
Managed Switch. If you do not plan to change anything, click Exit to leave the Wizard and enter the Web
Interface. You can also skip it by clicking Ignore the Wizard next time for the next time you logon to the
Web-based Management.
IP Information
IP Information will guide you to do basic configurations in 3 steps for the IP Information, access password, and SNMP.
Select Static, DHCP or BOOTP, and enter the desired new IP Address, select the Netmask and enter the
Gateway address, then click the Next button to enter the next Password setting page. (No need to enter IP
Address, Netmask and Gateway if DHCP and BOOTP are selected.) The Smart Wizard is for the quick
setting in IPv4 environment. For IPv6 network, please go to
L3 Function > IP Interface
page. If you are not
changing the settings, click Exit button to go back to the main page. Or you can click on Ignore the wizard next time to
skip wizard setting when the switch boots up.
Figure 4.1 – IP Information in Smart Wizard
NOTE: The Smart Wizard supports quick settings
for IPv4 network.
Password
Type the desired new password in the Password box and again in the Confirm Password, then click the
Next button to the SNMP setting page.
Loading ...
Loading ...
Loading ...