Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
40
Figure 4.45 – L2 Functions > MAC Address Table > Static Mac Address
The Static MAC Address Lists table displays the static MAC addresses connected, as well as the VID.
Add Static MAC Address: you need to select the assigned Port number. Enter both the Mac Address and
VID, and then Click Add. Click Delete to remove one entry or click Delete all to clear the list.
By disabling MAC Address Auto Learning capability and specifying the static MAC addresses, the network is
protected from potential threats like hackers, because traffic from illegal MAC addresses will not be
forwarded by the Switch.
L2 Functions > MAC Address Table > Dynamic Forwarding Table
For each port, this table displays the MAC address learned by the Switch. To add a MAC address to the
Static Mac Address List, click the Add checkbox, and then click Apply associated with the identified address.
Figure 4.46 – L2 Functions > MAC Address Table > Dynamic Forwarding Table
L2 Functions > Spanning Tree > STP Bridge Global Settings
The Switch implements three versions of the Spanning Tree Protocol, the Rapid Spanning Tree Protocol
(RSTP) as defined by the IEEE 802.1w specification and a version compatible with the IEEE 802.1D STP
and Multiple Spanning Tree Protocol (MSTP) as defined by the IEEE802.1 specification. RSTP can operate
with legacy equipment implementing IEEE 802.1D, however the advantages of using RSTP will be lost.
Loading ...
Loading ...
Loading ...