Loading ...
Loading ...
Loading ...
34 35
32
•
Hand clean inside door edge and the 1½" (3.8 cm) area around the inside oven
cavity frame, being certain not to move or bend the gasket. This area does not
get hot enough during self-cleaning to remove soil. Do not let water, cleaner,
etc., enter slots on door frame. Use a damp cloth to clean this area.
•
Wipe out any loose soil to reduce smoke and avoid damage. At high
temperatures, foods react with porcelain. Staining, etching, pitting or faint
white spots can result. This will not affect cooking performance.
T
o Self-Clean the Oven:
1. Close the oven door.
2
. Press SELF CLEAN. “2:00 3:00 3:30 “ will appear in the display.
3
. Enter the cleaning time by pressing the number keypad.
N
OTE: If you want to delay the start of the self-clean cycle, press START
TIME, and then set a Start Time by pressing the number keypad.
4
. Press START. After the door is locked, “Oven is cleaning “ will scroll in the
display until the self-clean cycle is finished.
5
. When the Self-clean cycle is finished, “Complete” appears in the display,
and the oven turns off. When the oven temperature decreases to below
482°F (250°C), the oven door will unlock.
6
. Open the oven door. Once the oven has completely cooled, remove ash
with a damp cloth.
N
OTE: To avoid breaking the glass, do not apply a cool, damp cloth to the
inner door glass before it has cooled completely.
REPLACING AN OVEN LIGHT
The oven light is a standard 25 watt (G9) appliance bulb.
I
MPORTANT: Before replacing the bulb, make sure the oven is cool and the
controls are turned off.
WARNING
Electrical Shock Hazard
Make sure the oven and lights are cool and power to the oven has
been turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses
serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
Range Care
CAUTION: DO NOT LEAVE FOOD OR COOKING UTENSILS, ETC., IN OVEN
DURING THE PYROLYTIC SELF-CLEANING MODE OF OPERATION
33
1. Disconnect power at the main power supply (fuse or breaker box).
2
. Remove the bulb cover by pulling it out of the opening.
3. Remove the burned out bulb from the socket.
NOTE: To avoid damage or decreasing the life of the new bulb, do not touch bulb
with bare fingers. Wear cotton gloves or use a tissue when replacing the light bulb.
4
. Replace the bulb, and then replace the bulb cover.
5. Reconnect power at the main power supply (fuse or breaker box).
OVEN DOOR REMOVAL
For normal oven use, there is no need to remove the oven door. However, should
it become necessary to remove the door, follow the instructions in this section.
I
MPORTANT:
•
Make sure oven is cool and that power to the oven has been turned off before
removing the door.
•
The oven door is heavy and fragile, and the door front is glass. To avoid
oven door glass breakage, use both hands, and grasp only the sides of the
oven door to remove. Do not grasp the handle.
•
Be sure both levers are securely in place before removing the door.
•
Do not force door open or closed.
Range Care
Loading ...
Loading ...
Loading ...