Loading ...
Loading ...
Loading ...
i!iiiii!iiii!i!ilii !!iiiiiiii iil;i!!iii!iiiiiiiii 'iill ii!!iiiiiii ii !ii' iiilliii!!iiiiii!!i iiiii!?!':! ii'ililflailili i !i!iiiiiiiiii iiiii!iiilii!ilillii llllllllllllllllllllllllll
ililii ;iiii! ii !iI Ij:iiiil i i i:!, il
When heating plates of food with a cook time that
you set, you can heat
two 10 in. (25.4 cm)
plates side by side or
one plate larger than
the turntable. You can
heat 2 more plates on
the Cooking Rack for a
possible total of 4
plates. For best results,
halfway through
cooking turn the plates
halfway around until the food in the front is in the
back. Do the same when heating a larger (9 to
13 in. [23 to 39 cm]) casserole. When heating 4
dinner plates, turn as described above and switch
the top plates with the bottom plates.
To heat 2 bottom plates together or one larger
plate, the turntable should not be
turning. You can shut the turntable
off by touching TURNTABLE
ON/OFF. "TURNTABLE OFF" appears on the
display. If you touch TURNTABLE ON/OFF before
starting to set the cooking function, your oven will
prompt you to enter a cooking time without you
needing to touch COOK TIME. Your turntable will
be turned back on when cooking is over or when
you touch OFF/CANCEL
NOTE: You cannot turn off the turntable when
using an "auto" function.
The Child Lock locks the control panel pads to
prevent unintended use of the microwave oven.
To lock the control panel:
TOUCH
and hold for 5 seconds
Two tones will sound and _ will appear on the
display. When the control panel is locked, 3 tones
will sound and LOCK will appear when you touch
any pad except for VENT FAN 4 SPEEDS and
LIGHT ON/NIGHT/OFF, Number pads 1 and 2,
and START/ENTER.
To unlock the control panel:
TOUCH
and hold for 5 seconds
Two tones will sound and I_ will be cleared from
the display.
You can set your microwave oven to display your
commands as you enter them without turning the
magnetron on. This feature helps you learn to use
your oven without actually cooking food. This will
only work when the oven is in standby mode.
To set the demo/learning feature:
TOUCH
and hold for 5 seconds
Two tones will sound and a small "d" will appear
on the display.
To cancel the demo/learning feature:
TOUCH
and hold for 5 seconds
Two tones will sound and the small "d" will
disappear from the display.
12
Loading ...
Loading ...
Loading ...