Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts
BULB
LIVE COLLAR
;KET
BULB COVER BAiL WiRE
TO REMOVE THE COVER:
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
2, Hold your hand under cover and
firmly push back the bail wire, until
it clears and releases the bulb
cover.
REPLACE THE LIGHT BULB:
Unscrew the light bulb and replace it
with a 40-watt home appliance bulb
TO REPLACE COVER:
1, Place the bulb cover into the
groove of the bulb socket.
2, Pull the bait wire forward unti! it
snaps into the indentation on top of
the bulb cover.
,!t, Reconnect the electrical power to
the oven.
-_ I}11_ : . Ill"'Ill 1_II ""IIiI{,Vl"
Do not touch a hot
oven light bulb. Do
not touch a bulb with
wet hands or wet
cloth. Never touch the elec-
trically live collar on the
bulb when removing or re-
placing the bulb. Do not re-
move any screws.
TO REMOVE:
Open the door to the broil stop
position, Grasp the door on each side
and lilt up and off the hinges, DO
NOT LIFT THE DOOR BY THE
HANDLE. /_
-_f_When the door is re.
moved and the hinge
arms are in the broil
stop position, do not
bump into the hinge arms.
They could snap back and
cause injur), to hands and
damage the porcelain finish
of the front frame= Cover the
hinge arms with empty pa-
per towel rolls or towels
while working in the oven
area,
TO REPLACE:
Remove the paper towel rolls or
towels. Make sure the hinges are
still in the broil stop position. Grasp
the door on each side. Lift the door
over each hinge. Line the slots at
the bottom of the door with the
hinges. Slide the door down over
the hinges as far as it will go.
Loading ...
Loading ...
Loading ...