Loading ...
Loading ...
Loading ...
OPERATION
ClockandKitchen Timer
To change the time of day, all lower
oven controls must be off.
When power is first connected to your
cooking center or after a power
failure, the digital display on both the
microwave and the lower oven control
will show lighted 8's and t8's and all
oven functions for about 15 second&
Then all lights go off and "RESET"
and "PF" appear in the lower display.
(Clock must be set before the
lower oven control will work,}
1. Press the CLOCK pad
2, Press the numbers pads
to set the time of day.
3. Press the START pad.
To check the time of day when the
display is showing other information,
Press the CLOCK pad. The time of
day will show as long as the Clock
pad is held down.
The Timer can be set up to 1t hours
and 59 minutes. The Timer counts
down in minutes until the last minute
is reached, then seconds are dis-
played. When the timer reaches zero,
"TIMERt' flashes in the display.
The smallest amount of time you can
set is 1 minute.
The timer does not control
oven operations, The CLEAR/
OFF pad wil! not cancel the
1. Press the TIMER ON/
OFF pad
2, Press the number pads
to set the amount of
time you will need,
3. Press the START pad.
If you make a mistake while setting or
want to change the time, press the
TIMER ONIOFF pad twice to reset
the timer.
The Timer will immediately start to
count down, After ! minute has
passed the display will change,.
When time countdown is complete,
the control wil! beep four times and
the display will flash° Press the
TIMER pad to cancel,
To cancel the timer at any time, press
the TIMER pad.
When you black out the display, the
Clock will maintain the correct time of
day It will reappear for the duration of
any function that displays a start and
stop time.
1, Press and hold, at the same time,
the CLOCK and STOP TIME
pads until the display goes blank.
To make the time of day reappear
press the CLOCK pad_
!7
Loading ...
Loading ...
Loading ...