Loading ...
Loading ...
Loading ...
OPERATION
Self-CleaningCycle
The door gasket is designed to have
a 5-6" gap at the bottom of the door.
This allows for proper air circulation.
Door Panel Gasket
t, Remove the broiler pan and grid,
oven racks, utensils and any foil
that may be in the oven,
2, Soil on the front frame,t" inside
the oven, and outside the door
gasket witl need to be cleaned
by hand,
Front Frame
j:
f_
Door Gasket '=_
Door Liner
\
Clean these areas with hot water,
soap-filled steel wool pads or
cleansers such as Soft Scrub@ to
remove any soil_ Rinse well with clean
water and dry:
3. Wipe up any heaw spi!lovers on
the oven bottom,
m
Do not clean the door gasket. The
fiberglass material of the oven
door gasket cannot withstand
abrasion, It is essential for the
gasket to remain intact, If you
notice it becoming worn, frayed,
or displaced on the door, it should
be replaced
It is normal for your oven door to give
the appearance of not having a good
seal against the range, This is due to
the gaskeL The location of the gasket
on the oven door maintains a good
seal and prevents any heat loss,
Utensils should
never be left in the
oven during a clean
cycle.
The oven racks may be
cleaned during the self-
clean cycle, but will Jose
their luster and become
hard to slide. If you choose
to leave them in during the
cycle, wiping them with
vegetable oil after the cycle
will help them slide easier,
For the first clean cycle,
vent the room with an
opened window or hood
vent.
Loading ...
Loading ...
Loading ...