Loading ...
Loading ...
Loading ...
User’s Manual
2-10
NOTE:
The VSL program allows multiple users to connect to the
network scanner at anytime. Yet, the scanner operation
can be used by one user at a time. If the network
scanner is being used by other user, you will be
prompted with a message to connect the scanner later.
When the scanner is available, you will also be prompted
with a message to connect the scanner and start
scanning your document.
If the network scanner has not been found, it is probably
the scanner and your computer are not in the same LAN.
In this case, you can assign a specific IP address of the
scanner to let [Virtual Scanner Link] automatically search
the scanner. Click the [Option] button, type your IP
address on the [Searching Address] field (1), then click
the [+] button (2) and finally click [OK] (3) to complete.
Searching Time: When the program is launched, it
automatically searches the scanner in the network in 5
seconds (default). The searching time can be changed
from a range of 5 to 20 seconds.
If the [Virtual Scanner Link] program has been closed
and then launched again, [Virtual Scanner Link] will
automatically search and connect the network scanner it
has previously connected to.
(1)
(3)
(2)
Loading ...
Loading ...
Loading ...