Loading ...
Loading ...
Loading ...
5
IMPORTANT INFORMATION FOR INSTALLING AND SERVICING THE APPLIANCE
The cooker can be installed separately, as a freestanding unit, or between kitchen units or between a kitchen unit and the wall.
This appliance is not connected to devices which exhaust combustion products.
Special attention must be focused on the prescriptions described below regarding room aeration and ventilation.
The dimensions of the appliance are listed below:
LENGTH DEPTH HEIGHT with worktop stamped HEIGHT with worktop welded
897mm 600mm adjustable 870-940mm adjustable 890-960mm
Fig.2 Fig.3
APPLIANCE SERVICING
IMPORTANT!
ALL SERVICING AND MAINTENANCE ARE TO BE COMPLETED BY THE MANUFACTURER’S AUTHORISED
PERSONNEL ONLY.
Before carrying any servicing operation disconnect the appliance from gas and electric supply and extra appliance from final
installation place in order to have access to the appliance for proper servicing intervention.
GAS CONVERSION
WARNING!
Before carrying out this operation, disconnect the appliance from gas and electricity.
Gas conversion shall be conducted by a factory-trained professional.
Call the customer service hotline to identify a factory-trained professional near your home.
The gas conversion procedure for this range includes differents steps:
1. Pressure regulator
2. Surface burners
3. Main oven burner
4. Visual checks prior to closure of oven bottom panel
5. Adjustment of minimum setting
The conversion is not completed if all 5 steps have not been concluded properly.
Before performing the gas conversion, locate the package containing the replacement nozzle shipped with every range.
IMPORTANT: Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 20 for
matching nozzles to burners. Save the nozzles removed from the range for future use.
STEP 1: PRESSURE REGULATOR.
For NG or ULPG installation ref. to fig. 7 and chapter ‘Appliance gas connection’ at pag 7
STEP 2: SURFACE BURNERS
For surface burners conversion ref to table 1 chapter ‘Adaption to various types of gas’ at page 8 and chapter
‘Conversion to different types of gas’ at page 12
STEP 3: MAIN OVEN BURNER
For main oven burner conversion ref to table 1 chapter ‘Adaption to various types of gas’ at page 8 and chapter
‘Conversion to different types of gas’ at page 12
Cooker with worktop stamped Cooker with worktop welded
Loading ...
Loading ...
Loading ...