Loading ...
Loading ...
Loading ...
16
APPLIANCE USE AND MAINTENANCE
ATTENTION: Important Warnings.
ATTENTION: ATTENTION: TAKE CARE DO NOT
OBSTRUCT THE OUTLET OPENINGS ON THE
BACKGUARD; THEY MUST BE UNOBSTRUCTED FOR
PROPER OPERATION
• For cookers resting on base
ATTENTION: if the cooker rest on a base, take the measures necessary to prevent the cooker from sliding
along the support base.
• For cookers with electric ovens
ATTENTION: The unit becomes hot during use. Do not touch the heating elements inside the oven.
ATTENTION: The accessible parts can become hot during use. Keep children away from the appliance.
• For glass doors
ATTENTION: Do not use harsh abrasive cleaning products or metal spatulas with sharp edges to clean the
oven door’s glass since this could scratch the surface and the glass could break.
• For gas cooktops
ATTENTION: Clean burner tops and trivets at least once a week, or after any spillage. Gas inlet pipes
should be checked periodically for leakages (see section on leak testing), at intervals not exceeding 12
months. Lubrication of valves should only be performed by an authorised person, and is required if the gas
control knobs become stiff and difficult to turn.
Do not use steam cleaner to clean the appliance.
WARNING: DO NOT MODIFY THIS
APPLIANCE
Please maintain your
appliance regularly.
REPLACING PARTS
Before performing any maintenance operations, disconnect the appliance from the g a s supply and electricity
network.
To replace parts such as knobs and burners, just remove them from the seats without dis assembling any part
of the cooker.
To replace parts such as nozzle supports, valves and electric components follow the procedure described in
the burner adjustment paragraph. To replace the valve or the gas thermostat, it is also necessary to
disassemble the two rear gas train brackets, loosening the 4 screws (2 per bracket) that attach it to the rest
of the cooker and, unscrew the nuts that attach the front burner valves to the control support, after removing
all the knobs. To replace the gas or electric thermostat, also disassemble the rear cooker guard, loosening
the relative screws, to be able to pull down and reposition the thermostat bulb.
To replace the oven bulb, just unscrew the protection cap that projects out inside the oven (Fig.17)
Fig.17
Loading ...
Loading ...
Loading ...