Loading ...
Loading ...
Loading ...
29
Cleaning the enamelled parts
The trivets and burner covers are cast iron with an enamel coating. To maintain the original features
of the enamelled parts they should be cleaned frequently with soapy water. Never use abrasive
powders. Do note leave acidic or alkaline substances on the enamelled parts (vinegar, lemon juice,
salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.
Cleaning the STAINLESS steel parts
Clean the parts with soapy water and then dry them with a soft cloth. The shine is maintained by
periodically using special products that generally are found in the market. Never use abrasive
powders.
Cleaning the burner bodies
The aluminium burner bodies sit on the burner bases. Remove from the base and wash them with
soapy water. Rinse and dry, and check that all holes and slots are fully cleaned. Replace on the burner
bases, taking care that they are positioned and orientated correctly.
Cleaning the inside of the oven
To thoroughly clean the inside of the oven, it is recommended that the door be removed first. First
lock the hinge in place with the nail supplied (01-02). With the hinges fixed, grab both sides of the
door and slowly work the door off the hinges towards you. Once fully removed, place in a safe
position until it is time to fix back in place (in the opposite order). The internal rack guides can also
be temporarily removed by undoing the screws holding them in place and lifting out.
Loading ...
Loading ...