Loading ...
Loading ...
Loading ...
25
USING THE ANALOG CLOCK (fig.28)
For setting up the time displayed by watch pointers push briefly twice the knob till
getting the CLOCK icon flashing.
For increasing or decreasing time displayed 1 minute by 1, turn the knob clockwise or
counterclockwise, le minutes pointer will increase or decrease 1 minute by minute
clockwise or counterclockwise.10 seconds after last set up the electronic timer will exit
time set up mode.Minute minder set up will activate a simple alarm when set up time is
over.
For setting up an alarm push briefly once the knob till getting ALARM icon flashing.
The turn the knob, set up the alarm time and briefly push once the knob to confirm;
Alarm Icon will stay on for all the set up time. When set up time is over an acoustic
buzz will be activated. Push again briefly once the knob for going back to time display.
Fig.28
For cancelling minute minder set up keep the knob pushed until ALARM icon goes off.
USING THE ELECTRONIC TIMER (fig.29)
Selecting and adjusting timer functions
Select a timer function by pressing the function button and set the required
time with the +/- buttons.
Pressing the “+” button increases the time set, pressing “-“ decreases it. The
count-up and count down speed increases the longer the button is held in
the appropriate position.
Manual operation
The oven needs to be put into manual mode to operate without the timer.
Press duration and end time button together. This will allow the oven to
bypass the timer and run manually. The “A” symbol will be erased and the
pot symbol illuminated. Any program which has been set is cancelled.
Setting the time of day
Select the function by pressing the duration and end buttons together, and
then adjust the time of day with the +/- buttons.
Semi-automatic operation with cooking duration
Select the desired cooking function and temperatures using the oven control knobs. Press the duration
button and set the required duration with the +/- buttons. The “A” and cook pot symbols appear and the
oven becomes active. When the time has been reached, the oven and the cook pot symbol are turned off.
An audible signal sounds and the symbol “A” will begin to flash. Reset the oven to off using the oven
control knob and press any of the 3 buttons to the left to stop the audible sound.
Semi-automatic operation with cooking end time
Select the desired cooking function and temperatures using the oven control knobs. Press the end button
and set the required end time with t h e +/- buttons. The “A” and cook pot symbols appear and the oven
becomes active. When the end time has been reached, the oven and the cook pot symbol are turned off. An
audible signal sounds and the symbol “A” will begin to flash. Reset the oven to off using the oven control
knob and press any of the 3 buttons to the left to stop the audible sound.
Fully automatic operation
Select the desired cooking function and temperatures using the oven control knobs. Press the duration
button and set the required cooking duration with the +/- buttons. The “A” and cook pot symbols appear
and the oven becomes active. Press the end button (the earliest end time will be displayed) and set the
required end time with t h e +/- buttons. The oven and the cook pot symbol will both turn off.
Fig.29
Loading ...
Loading ...
Loading ...