Loading ...
Loading ...
Loading ...
26
When the start time is reached (end time – duration), the cook pot symbol appears again and the oven
becomes active. When the end time has been reached, the oven and the cook pot symbol are turned off. An
audible signal sounds and the symbol “A” will begin to flash. Reset the oven to off using the oven control
knob and press any of the 3 buttons to the left to stop the audible sound.
Minute minder
Press the minute minder button and set required time with the +/- buttons. While the function is running, the
bell symbol is displayed. When the time set has elapsed, the audible signal sounds. Press any of the 3
buttons to the left to stop the audible sound.
Audible signal
The audible signal sounds at the end of a minute minder cycle or of a cooking program for a period of 7
minutes (unless stopped by pressing one of the 3 buttons to the left). The sound can be adjusted by
pressing the “-“button with no other function selected. There are 3 different sounds to choose from.
Timer function verification
A function which has been set is carried out after setting the time required. The “time to run” can be verified at
any point by pressing the appropriate function button.
Cancelling timer functions
A program can be cancelled by selecting the manual function. When a program finishes, it is automatically
cancel.
USING THE
3 KEYS ELECTRONIC PROGRAMMER
(fig.30)
The first start up
The numbers and the A letter on the display are blinking when the oven is switched
on for the first time, or after a power cut: the appliance cannot be operated in this
condition.
To set the hour and/or to enable the appliance to operate press the M key for at
least 2 seconds: the A letter turns off and the numbers now are steady on the
display.
The dot (3) starts blinking: press the - or
+
key to set the hour.
The hour is accepted by the programmer just few second after having released the
key.
N.B. the appliance can be correctly used for coking only when you will see on the
display the symbol (2).
Fig.30
The
A*
Automatic programmer is working. (* in some models there is the writinq 'Auto' instead of A).
2
The appliance is ready for manual use (not automatic).
3
•
When blinking, the programmer is in setting hour mode.
4 Timer set.
5 -
Decreasing numbers when setting the timer.
Also for choose your desired sound level ( 3 levels available).
6
M
"Mode" kev to access the programming options of the programme.
7
+
Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound signal, which can be set for a max time of 23h59min. once
elapsed the set time, the (4) symbol turns off and a sound signal is heard; this sound set off
automatically in 7min, or you can stop it by pressing any key of the programmer. To set the timer press
the M key for 2 seconds, or anyway just to see the (4) symbol blinking. Set the timer by using the
+
or -
keys. Release the
+
or - key when you have matched your desired time. In a few seconds the current
time appears on the display together with the ) symbol. The countdown starts immediately from now
on.
Semi-automatic cooking
Cooking time: Once having selected a coking function and set the desired temperature, press the M
key for a 2 seconds time to access the programming mode. The (4) symbol appears. Release and
press again the M key. On the display, the A symbol starts blinking and the " dur " writing appears on
the display, then it changes to O' 00. Set the cooking time with the - or
+
keys. (max available time:
Loading ...
Loading ...
Loading ...