Loading ...
Loading ...
Loading ...
65
Electrical Connection
Tools
BEFORE INSTALLATION
BEFORE INSTALLATION
Gather the required tools before starting installation. Read and follow the instructions
provided with any tools listed here.
TOOLS NEEDED
• Measuring Tape
• Straightedge
• Pencil
• Phillips Screwdriver
• Level
• Wire Cutters and Wire Stripper
• Hand or Sabre Saw
• 1” Hole Saw
• Cordless Drill and Drill Bit
• Safety Gloves and Goggles
• Volt Meter (0-250VAC)
PARTS NEEDED
• UL Listed Conduit Connector
• UL Listed Wire Connectors
PARTS PROVIDED
• #8-14 x 1” Screws - 4
ELECTRIC SHOCK HAZARD
If codes permit and a separate ground wire is used, it is recommended that a
qualified electrical installer determine that the ground path is adequate and wire
gauge is in accordance with local codes. Do not use an extension cord.
IN U.S.A.
Be sure that the electrical connection and wire size are adequate and in conformance
with the National Electrical Code, ANSI/ NFPA No. 70-latest edition and all local
codes and ordinances. A copy of the above code standards can be obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, MA 02269
IN CANADA
Be sure that the electrical connection and wire size are adequate and in conformance
with CSA standard C22.1, Canadian Electrical Code, Part 1 - latest edition, and all
local codes and ordinances. A copy of the above code standards can be obtained
from:
Canadian Standards Association
178 Rexdale Blvd.
Toronto, ON M9W 1R3 CANADA
• The electrical power to the oven branch circuit must be shut off while line
connections are being made.
• Do not use an extension cord with this appliance.
• Electrical ground is required on this appliance. The free end of the green wire
(the ground wire) must be connected to a suitable ground. This wire must remain
grounded to the oven.
• If cold water pipe is interrupted by plastic, non metallic gaskets, union
connections or other insulating materials, DO NOT use for grounding.
Loading ...
Loading ...
Loading ...