Loading ...
Loading ...
Loading ...
Connecting YourTV 3 5
Connecting remote IR devices
To control the device(s):
Point the TV remote control toward the front of the TV and press the
button for the desired function. The signal passes from the remote
control through the TV to the device via the IR Blaster cable. For more
information, see "Setting the IR Blaster" on page 59.
(Sample Illustration) Controlling the device(s) - remote control
NOTE TheIRpass-throughfeaturedoesnotsupportall IRcontrolleddevices.
Satisfactoryqualitymaynotbe attainablewithcertaindevices.
If you cannot locate the device's infrared sensor:
1 Turn off the device.
2 Starting at the device's lower-left corner, place the end of the
device's remote control (with the infrared emitter) so it touches the
front of the device. Press the POWER button.
(Do not use the TV's remote control for this step.)
3 If the device turns on, the sensor is located where the remote control
touched the device.
4 If the device does not turn on, move the remote control slightly to
the right and press the POWER button again.
5 Repeat the previous steps if necessary.
Loading ...
Loading ...
Loading ...