Loading ...
Loading ...
Loading ...
PRECAUTIONS - 75914779546/D
e
paper, place it so that it will not
interfere with the hot air
circulation inside the oven
cavity.
Do not use the open door to
rest pans or trays on the internal
glass pane.
Never use the oven door to
lever the appliance into place
when fitting.
Avoid exerting too much
pressure on the door when
open.
Do not use the handle to lift or
move this appliance.
Installation and maintenance
THIS APPLIANCE MUST NOT
BE INSTALLED IN A BOAT OR
CARAVAN.
The appliance must not be
installed on a pedestal.
Position the appliance into the
cabinet cut-out with the help of
a second person.
To prevent any possible
overheating, the appliance
should not be installed behind
a decoration door or a panel.
Installation and servicing should
be carried out by qualified
personnel in accordance with
current standards.
Have the electrical connection
performed by authorised
technical personnel.
The appliance must be
connected to earth in
compliance with electrical
system safety standards.
Use cables withstanding a
temperature of at least 90 °C.
The tightening torque of the
screws of the terminal supply
wires must be 1.5 - 2 Nm.
If the power cable becomes
damaged, contact technical
support immediately to arrange
for it to be replaced in order to
avoid possible hazards.
WARNING: while positioning
the appliance, make sure that
the power supply cable is not
caught or damaged.
Always use any necessary/
required personal protective
equipment (PPE) before
performing any work on the
appliance (installation,
maintenance, positioning or
movement).
Before performing any work on
the appliance, switch off the
power supply.
Allow the appliance to be
disconnected after installation,
via an accessible plug or a
switch in the case of a fixed
connection.
Fit the power line with an all-
pole circuit breaker with a
contact separation distance
sufficient to provide complete
disconnection in category III
overvoltage conditions,
pursuant to installation
regulations.
This appliance can be used up
Loading ...
Loading ...
Loading ...