Loading ...
Loading ...
Loading ...
5
Sharing
95
You can perform tethered shooting with the camera connected
to a computer using the optional “IMAGE Transmitter 2”
software. Captured images can be directly saved to the
computer.
1 Set [USB Connection] to [PTP] in the D2 menu.
2 Turn the camera off.
3 Connect the camera to a computer using a USB
cable.
y Connecting the camera to a computer (p.94)
4 Turn the camera on.
5 Start “IMAGE Transmitter 2” on the computer.
“IMAGE Transmitter 2” is started and the computer
recognizes the camera.
u Caution
• When the capture mode selector switch is set to C, tethered
shooting cannot be performed if a memory card is not
inserted in the camera.
t Memo
• For details on “IMAGE Transmitter 2”, download and refer to
the latest version of the “User Guide [Operation]” available at
the following site.
http://www.ricoh-imaging.co.jp/english/support/
download_manual.html
• During tethered shooting, the shutter release always has
priority regardless of the [AF.S Setting] setting of [Phase
Detection AF] and the [Contrast AF Options] setting of
[Contrast Detection AF] in the A1 menu. (p.57, p.59)
This camera has a built-in Wi-Fi™ function. By directly connecting to
a communication device such as a smartphone and tablet via wireless
LAN, the camera can be operated from the communication device and
images can be shared with others via social networks or e-mail.
The Wi-Fi™ function is disabled when the camera is turned on.
Enable the function using one of the following methods.
• Setting from the menus (p.96)
• Setting with the Smart Function (p.96)
When the Wi-Fi™ function is
enabled, the Wi-Fi lamp lights up and
the 7 (white) icon indicating the
wireless LAN status is displayed on
the status screen and Live View
screen. When 8 (gray) is displayed,
a connection with the communication
device is not established correctly.
t Memo
•
Even after the Wi-Fi™ function is enabled, it returns to an inactive
state when the camera is turned off and on again. Also, when the
camera enters
C
mode, the Wi-Fi™ function is disabled.
• Auto Power Off is not available while a Wi-Fi™ connection is
established or images are being transferred. If Auto Power
Off is activated while a connection is not established, the
Wi-Fi™ function is disabled. The function is enabled when the
camera recovers from Auto Power Off.
• The Wi-Fi™ function is disabled during the USB connection.
u Caution
• Do not attempt to use the Wi-Fi™ function in a location where
the use of wireless LAN devices is restricted or prohibited,
such as on airplanes.
• When using the Wi-Fi™ function, observe local laws and
regulations governing radio communication.
•
If a memory card with a built-in wireless LAN function (such as an
Eye-Fi card or a Flucard) is used, radio wave interference may
occur. When this occurs, disable the Wi-Fi™ function of the camera.
Operating the Camera with a Computer
Using the Camera with a
Communication Device
Enabling the Wi-Fi™ Function
1/
1/
250
250
1600
1600
F
F
5.6
5.6
99 99 9
99999
99 99 9
99999
Loading ...
Loading ...
Loading ...