Loading ...
Loading ...
Loading ...
7
111
Appendix
The shutter can be released even if the aperture ring of the D
FA, FA, F, or A lens is not set to the 9 position or a lens without
an 9 position is attached.
Select [Enable] in [26 Using Aperture
Ring] of the E4 menu.
The following restrictions apply depending on the lens being
used.
t Memo
• If the aperture ring is set to a position other than 9, the
camera operates in J mode regardless of the mode dial
setting except when set to L, M, or N mode.
• [F--] appears for the aperture indicator in the status screen,
Live View screen, and viewfinder, and on the LCD panel.
You can perform Catch-in Focus shooting using a manual focus
lens. The shutter is released automatically when the subject
comes into focus.
1 Attach a manual focus lens to this camera.
2 Set [24 Catch-in Focus] to [On] in the E4 menu.
3 Set the autofocus mode to v and set [AF
Mode] to x.
4 Place the camera on a fixed support such as a
tripod.
5 Adjust the focus to the position where the
subject may pass and press 0 fully.
When the subject comes into focus at the specified position,
the shutter is released automatically.
Using the Aperture Ring
E4
Lens Restriction
D FA, FA, F, A, M (lens
only or with automatic
diaphragm
accessories such as
Auto Extension Tube
K)
The aperture remains open.
The shutter speed changes in relation
to the open aperture but an exposure
deviation may occur.
D FA, FA, F, A, M, S
(with diaphragm
accessories such as
Extension Tube K)
Pictures can be taken with the set
aperture value but an exposure
deviation may occur.
Manual diaphragm
lens such as reflex
lens (lens only)
FA SOFT 28mm/
FA SOFT 85mm/
F SOFT 85mm
(lens only)
Pictures can be taken with the set
aperture value in the manually
adjustable aperture range.
26
26
25
25
1
1
1
1
2
2
Using Aperture Ring
Using Aperture Ring
Disable
Disable
Enable
Enable
Shutter will release when
Shutter will release when
aperture ring is not set to the
aperture ring is not set to the
"A" position
"A" position
OK
OK
Cancel
Cancel
How to Achieve the Correct Exposure with the Aperture
Ring Not Set to 9
The correct exposure can be achieved by the following
procedures when the aperture ring is not set to 9.
1 Set the mode dial to L.
2 Set the aperture ring to the desired aperture.
3 Press M.
The correct shutter speed will be set.
4 If the correct exposure cannot be achieved, adjust the
ISO sensitivity.
Performing Catch-in Focus Shooting
E4
Loading ...
Loading ...
Loading ...