Loading ...
Warranty.................................... 2
Safety Rules ............................... 2-3
Unpacking .................................. 3
Assembly ................................. 3-5
Installation................................. 5-6
Operation ................................ 6-14
Maintenance ............................. 15-16
Troubleshooting........................... 17-18
Parts Illustrationand List ................... 19-26
EspaSol................................. 26-43
FU LL ONE YEAR WARRANTY
If this productfailsdue to a defect in material or work-
manship withinone year from the date of purchase,
Sears will at its option repair or replace itfree of
charge. Contact your nearest Sears Service Center
(1-800-4-MY-HOME) to arrange for productrepair,or
returnthis productto place of purchasefor replacement.
If this productis used for commercial or rental purpos-
es, this warranty will applyfor 90 days from the date of
purchase.
This warranty applies only while this productis used in
the United States.
This warrantygives you specificlegal rights and you may
also haveother rightswhichvary from state to state.
Sears, Roebuck and Co., Dept. 8t7WA, Hoffman
Estates, IL 60179
WARNING: Foryour own safety, read all of the rules
and precautions before operating tool.
CAUTION: Always follow properoperating procedures
as defined in this manual even ifyou are familiarwith
use ofthis or similar tools. Remember that being care-
lessfor even a fractionof a second can resultin severe
personal injury.
BE PREPARED FOR JOB
• Wear proper apparel. Do not wear loose clothing,
gloves, neckties,rings, braceletsor otherjewelry
which may get caught in movingparts of machine.
• Wear protective hair coveringto contain long hair.
• Wear safety shoes with non-slip soles.
• Wear safety glasses complying with United States
ANSI Z87.1. Everyday glasses have onlyimpact
resistantlenses.They are NOT safety glasses.
• Wear face mask or dust mask ifoperation is dusty.
• Be alert and think clearly.Never operate power tools
when tired, intoxicatedor when taking medications
that cause drowsiness.
O Seam, Roebuck and Co.
2
PREPARE WORK AREA FOR JOB
• Keep work area clean.Clutteredwork areas invite
accidents. -, -.
• Do not use power tools in dangerous environments.
• Do not use power tools in damp or wet locations. Do
not expose power tools to rain.
• Work area should be proper{y lighted.
• Proper electrical receptacle shouldbe available for
tool.Three prong plug should be pluggeddirectly
intoproperly grounded, thrae-prongreceptacle.
• Extension cordsshouldhave a groundingprong and
the three wires ofthe extensioncordshouldbe of
the correct gauge.
• Keep visitors at a safe distance from work area.
• Keepchildren outofworkptace.Makeworl_shop child-
proof. Use padlocks, master switchesor remove switch
keysto prevent anyunintentional use ofpower tools.
TOOL SHOULD BE MAINTAINED i
Always unplugtool priorto inspection.
• Consultmanualfor specificmaintainingand adjust-
ingprocedures. :
• Keep tool lubricatedand clean for safestoperation.
• Remove adjustingtools. Form habitof checking to
see that adjustingtools are removedbef(_raswitch-
ing machineon.
• Keep all parts inworkingorder.Check to determine
that the guard or other parts willoperate i)ropedy
and performtheir intendedfunction. ,
• Checkfor damaged pads, Check for aiignmentof
movingparts, binding,breakage, mountingand any
otherconditionthat may affect a tool'soperation.
• A guard or other part that is damaged shouldbe
properlyrepairedor replaced. Do not perform
makeshiftrepairs.(Use parts listprovidedto order
replacement pads.)
KNOW HOW TO USE TOOL
• Use dght toolforjob. Do not forcetool or attachment
to do a jobfor which itwas not designed.
• Disconnecttoolwhen changing blades. ,
• Avoidaccidental stad-up, Make surethatlthe switch
is in the OFF positionbeforepluggingin. _
• Do not force tool.It willwork mostefficientlyat the
ratafor whichit was designed,
• Keep handsaway from movingpartsand Cutting
surfaces. • :'
• Never leave tool runningunattended.Turnthe power
offand do not leave tool untilitcomes to a complete
stop.
• Do not overreach.Keep properfooting and balance.
• Never standon tool.Seriousinjurycould occurif toolis
tippedor if blade isunintentionallycontacted.
• Knowyourtool. Learn the tool'soperation,applica-
tionand speciticlimitations.... :_,_
• Use recommendedaccessodes (refe=:topage 25).
Use of improperacoessodesmay cause risk of
injuryto persons. : -*L_
Loading ...
Loading ...
Loading ...