Loading ...
Loading ...
Loading ...
Careandcleaning.
Do not rub or clean the door gasket--
it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn,
frayed or damaged in any way or if it has
become displaced on the door, you should
have it replaced.
Cleaning the Oven Door
Tocleanthe insideof thedoor:
Because die area inside die gasket
is cleaned during the self'clean cycle,
you do not need to clean this area
by band.
The area outside the gasket and
the door liner can be cleaned with a
soap4illed or plastic scoudng pad,
hot water and detergent. Rinse well
with a vinegar and water solution.
Toclean the outside of thedoor:
Use soap and water to tlloroughly
clean the top, sides and flont of the
oven door Rinse well. You m W a/so
use a glass cleaner to clean the glass
on die outside of the door Do not let
water drip into the vent openings.
If any stain on file door vent trim is
pe,_ismnt, use a soft abraske cleaner
and a sponge-scrubber for best results.
Spillage of marinades, fhfit] uices,
tomato sauces and basting materials
containing acids m W cause
discoloration and should be wiped
up immediaml> When surface is cool,
clean and _{nse.
Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the do(m
Lift-Off Oven Door
Slot
Hinge10cl<
Pull hinge locks down to unlock
Removal position
The door is very heavy. Be careful when
removing and lifting the door.
Donot lift thedoorbythehandle.
Toremovethedoor:
[_] Fully open the do(m
[_ Pull the hinge locks down toward
the door flame, to the unlocked
position. A tool, such as a small fiat-
blade screw&iveL m W be required.
[_ Firmly grasp both sides of the door
at the top.
Close door to die door removal
position (see illusuafion).
[_ Lift door up and out undl the binge
arItl is clear of the slot.
Toreplacethedoor:
[_ Firmly grasp both sides of the door
at the top.
%
Hinge
arm
With the Bottom_l III Hin;earm
door at the edge _lll[_k I/'i
same angle as ofslot,
the removal
position, seat the
indentation of
the binge am1 Indentation
into the bottom
edge of the binge slot. The notch in
the binge am1 must be flflly seated
into die bottom of tlle slot.
Fully open the door If the door will
not fldly open, tlle indentation is
not seated correctly in die bottom
edge of the slot.
Push the binge locks up against the
flont flame of the oven cavity; to the
locked position.
Hinc
loci<
Push hinge locks up to lock
[_ Close the oven door
40
Probe
The temperature probe may be cleaned
with soap and water or a soap-filled
scorning pad. Cool the mmpemmre
probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad,
rinse and dry.
Donotimmersethe temperatureprobe
in water
Donotstorethetemperatureprobein
theoven.
Loading ...
Loading ...
Loading ...